C. elegans Strain Validation Services
C. elegans research projects often involve comparing phenotypes between different strains. In order to be confident that the phenotype researchers observe is due to a known genetic cause, it is vital for them to know the genetic composition of that strain. Without the accurate genetic information, researchers will encounter many problems including:
- strange phenotypes
- unexpected or incorrect phenotypes
- unwanted deletion mutation
- incorrect genotype
- weak expression of tagged proteins
- transgene not expressed at all
Learning from our own strain validation experience, we developed a menu of validation services for C. elegans researchers so you have confidence in your phenotyping results from validated strains. Strain validation can be tedious and time consuming. It is faster and easier for us to perform the services for you than to figure it out on your own.
For researchers who need more genetic information about their strains, we can provide custom genotyping and sequencing packages and expression validation services that include a full authentication of the genotype of your strain and information about gene expression. All our services fit NIH guidelines for authentication of key biological reagents.
Our validation services include:
- Locus sequencing and Genotyping with custom primers – obtain information regarding the genotype of strains
- Outcrossing Package – confirm that a C. elegans strain has a genomic background that is free from unintended or undesired mutations.
- Whole-genome sequencing: know the genetic background of the strain you are studying.
- Intron/Exon Splicing Validation: ensure that the coding sequence is being expressed as intended.
- Expression Quantification: understand whether your construct is being expressed adequately in relation to wild-type expression levels.
All of these services can also be paired with cryostorage for secure long-term storage of your validated strains.
|Locus sequencing and Genotyping||$850 and up||2-4 weeks||Custom genotyping assay, final report|
|Whole-genome sequencing||8-10 weeks|
|Intron/Exon Splicing Validation||2-4 weeks|
|Expression Quantification||6-8 weeks|
- Information about the genome of the animal so background mutations can be identified or eliminated
- Information about expression of transgenes or native genes
- A comprehensive report with results, data analysis, and materials & methods
- Long-term cryostorage of key biological reagents
1. Locus Sequencing and Genotyping with Custom Primers
Who is this service for?
Researchers who need to determine the genotype and locus sequence in their new strain.
We will use our expertise to determine the genotype and locus sequence quickly and enable you to move on with your research by providing you with a set of genotyping primers for your own use.
This service allows C. elegans researchers to obtain information regarding the genotype of strains they did not make including:
- Genotype and locus sequencing report including genotyping data for their strain(s)
- Primer set(s) and instructions to genotype their strain(s)
To genotype the locus of interest, we use a variety of techniques including traditional PCR (Fig. 1), HRMA (Fig. 2), DMAS. Sequencing is included in all techniques (Fig. 3)
Fig. 1: Determine heterozygous at the locus of interest vs. wild type by detecting the absence or presence of a band. Top row: samples and controls were used in a PCR screen specific to the mutant allele. Three of the samples contain the mutant specific band, but the other samples do not.
Bottom row: samples and controls were used in a PCR screen specific to the wild type sequence. All samples and the wild type control amplify at the expected size. We can conclude that three of the samples are heterozygous at the locus of interest and all other samples are wild type.
Fig 2: Using HRMA to identify homozygous lines. The sample melt curves are in green and the wildtype controls are in blue. All of the samples have a melt peak at the expected temperature of homozygous mutant. These lines are homozygous.
Fig. 3: Confirming the genotype of your strain via sequencing. During the analysis of the sequencing results, we will confirm whether your sequence matches the expected theoretical sequence or not.
2. Outcrossing Package
Who is this service for?
Researchers who want to make sure that a C. elegans strain has a genomic background that is free from unintended or undesired mutations (Fig. 4) and don’t want to outcross their own strains.
Fig. 4: Background mutations can lead to misinterpretation of phenotypes. Loss of function is a reported phenotype due to a large deletion in the kqt-3 gene. A decrease in the mean pump frequency and additional phenotypes have been observed, such as unregulated defecation cycles (A). However, when the whole coding sequence was knocked out, the researchers did not observe the decrease in mean pump frequency phenotype (B). The decreases in the pumping frequency are caused by something in the background of the kqt-3 strain, not the kqt-3 gene itself. Outcrossing the strain can help identify whether a phenotype is truly attributed to a certain gene.
We will do the outcrossing for you so you can obtain the outcrossed strains for your project, while saving your time and hassle. We will deliver:
- outcrossed strain
- protocol for genotyping
- genotyping primers
- Final report including results, data analysis, and materials & methods
3. Whole-genome Sequencing
Who is this service for?
For researchers who need to ensure that their strain has a known background (with no interfering mutations) and determine the genetic cause of a phenotype.
With this service, you will get a list of candidate genes and mutations that may be causing the phenotype you have observed and be confident that your strain is free from background mutations.
We provide whole genome sequencing and interpretation of your C. elegans strain including the genomic sequence and data analysis to identify the differences from N2 (or a different reference strain). You will receive data and a report including:
- Raw sequencing data
- Report detailing the results of the sequence analysis. (Figs. 5 & 6)
- Identification of genes containing mismatch, nonsense, and frameshift mutations. (Table 1)
Fig. 5: Example QC and coverage data from Whole genome sequencing (WGS). (Left): the pie chart shows that 28,160,500 clean reads were obtained (98.5%) from 4.2GB of sequencing data. (Right): the bar graph shows that coverage was equally spread between the six C. elegans chromosomes. Coverage of at least 1x was obtained for 99.96% of the genome. Coverage of at least 4x was obtained for at least 99.91% of the genome. The average depth of coverage was 28.94x.
Fig. 6: Exonic SNP and Indel Analysis. SNPs and Indels were detected and filtered for those occurring within exons. Within the coding regions, 143 synonymous SNPs were identified that should not have an effect on the protein coding sequence. However, 191 non-synonymous SNPs and 5 early stop SNPs were also identified that may affect protein function. Also, 27 frameshift causing insertions and deletions were identified.
No information available.
Is predicted to enable rRNA binding activity and ribosomal small subunit binding activity.
Is predicted to enable ATP binding activity and protein serine/threonine kinase activity.
Is predicted to encode a protein with the following domains:
Is predicted to encode a protein with the following domain: Phosphorylation site.
4. Intron/Exon Splicing Validation
Who is this service for?
For researchers who need to make sure that the coding sequence is being expressed as intended and gain a better understanding of the expression products from their gene of interest.
Sequence analysis of the expressed mRNA.
- For a native gene, we can provide evidence for the expression of a specific isoform or a confirmation of the true expressed start and stop.
- For a transgene, we can determine if the introns have been spliced out and that no aberrant splice sites have been introduced. (Figs. 7 & 8).
We provide a report showing the sequencing results including:
- Sequencing of the expressed mRNA from your gene
- Results of the sequence analysis along with a materials and methods description that you can use in your publications.
Fig. 7: Incorrectly spliced junction. Above is an example of a junction that is not splicing correctly. Notice that the sequencing is correct and clean from both directions until it reaches the splicing junction. We would recommend fixing this sequence based on the splicing data above.
Fig. 8: Correctly spliced junction. Above is an example of a junction that is splicing correctly. The sequencing remains correct and of good quality throughout the read.
Did you know?
Often synthetic introns are introduced into a transgene sequence to help with expression. It is important to be sure that those introns are splicing out correctly and that no aberrant splicing sites have been introduced. If the splicing does not occur correctly, then the protein sequence may be incorrect or may not even express at all.
Additionally, when researchers are beginning to explore a new gene, they may not know the most abundant isoform or even the true start and stop of the coding sequence. Without this information, they may incorrectly tag the “start” of the gene only to find out that the true start ATG was in exon 2. This information is needed for many genome editing activities and other molecular assays.
5. Expression Quantification
Who is this service for?
For researchers who need to know that the expression levels are not adversely influencing the strain’s phenotype.
This service allows C. elegans researchers to gain insight into their strain of interest by knowing whether their gene of interest is being expressed adequately. By checking the expression levels via qPCR, we can provide data regarding the expression level of your gene of interest in the strain you are working with (Fig. 9).
A final report including results, data analysis, and materials & methods will be delivered to you.
Fig. 9: Expression analysis shows endogenous fluorescent tagging has no effect on expression of the tagged gene. Expression of a tagged gene. The gene of interest was tagged at the N-terminus with mCherry fluorescent protein using CRISPR/Cas9. Two primer sets (PS1 and PS2) were designed to the gene of interest. Neither of the mCherry tagged strains (grey bars) showed a significant difference from N2 wild-type (black bars) in gene expression.